A
very popular Analogue and Digital satellite meter. It can be powered up
directly from the receiver or from an external 12V-18V source (Not
supplied). This meter will receive the 22KHz tone signals for the digital
reception and indicate if the tone is switched on. A small mini computer
screen will indicate the volts and amps being produced from the receiver
for troubleshooting, plus a digital bar is shown for dish alignment. It can control and run any DisecqC 1.2 actuator plus Nokia
Satscan and Triax H/H mounts. Also it has the added ability to meter two LNB's
on the same dish if required, a good all round meter for aligning Sky
dishes, motorised and other Digital / Analogue satellites.
