Digital
LNB,s
Universal
Type: 9.75 / 10.600Ghz suitable
to receive digital signals for the Sky digital and free to air European
digital receivers, the LNB's listed on this page are used on dishes from 60cm diameter
upwards which have a 40mm neck fitting.
If you require
an LNB for a Sky Digidish, these are normally sold complete with the dish.
We do have replacement single LNB's and 4 output
LNB's which are supplied complete with adaptors to fit most Digidishes.
LNB's
for other Dishes (Not Digidish type)
Single output LNB (0.6db) LNB,s (NB: The make and colour of
these may vary but all will have the same 0.6db specification and 40mm neck
size to fit most dishes)
Single output
LNB (0.3db) These are a better specification than the above and
should pull in a slightly better signal
Twin output LNB (0.6db) Two independent outlets, 2 receivers can be
used from the one satellite dish Secure
Shopping Cart
Twin / Twin LNB (Typical 0.6db) Four independent outlets, up to 4
receivers can be used from the one satellite dish. The
design may vary, these are available for dishes with a 40mm LNB neck size
or to fit a typical Sky digidish.
Quattro LNB 0.7db (Four output wavebands, for commercial work)
The
Quattro LNB is suitable for large commercial type systems that require 5
or more satellite receivers to operate from one dish. These LNB's have 4
outputs namely: High band V, High band H, Low band V & Low band H.
They are designed to operate with a Multiswitch to give access to 8, 12,
18 etc receivers.
For information on LNB faults go to the Information
section Testing the Signals