Programming your Sky remote control
The remote control can also
operate the basic TV functions (Channel changing / volume control / Text
etc) on around 90% of TV manufacturers.
The 4 digit code (Shown in your
Sky handbook) is used to identify the make and manufacturer of your TV.
The individual 3 digit codes are used for each manufacturer.
To program
using the 3 digit code.
1) Switch on the TV set
2) Press the TV button on the
Sky Remote
3) Hold down the select and red
buttons for 2-3 seconds until the LED blinks twice
4) Enter the 3 digit code
5) Press the select button to
store
Press TV and any number to
test, If this does not operate the TV set try below.
To program
using the 4 digit code
1) Switch on the TV set
2) Press the TV button on the
Sky Remote
3) Hold down the select and red
buttons for 2-3 seconds until the LED blinks twice
4) Press the TV button on the
Sky Remote again
5) Enter the 4 digit code for
your make of TV
6) The LED should blink twice,
if not recheck the 4 digit code used and go back to 1
7) Press the standby button on
the Sky Remote (The TV should go to standby)
8) Press select to store this
setting
If the TV does not go into
standby press the TV button then the standby button, then TV then standby,
keep repeating this until successful. This will scan the codes used for a
particular make of TV.
Programming
the Remote to view Sky on an RF channel
Most installations comprise of
a Scart connection from the Sky receiver to the TV. This is normally
activated by pressing the Sky button for viewing Sky. For installations
where the use of a Scart lead is not possible the Sky button on the remote
can be set to instruct the TV to go to channel 6 (Or any channel that Sky
is normally viewed on) and switch on the Sky receiver.
1) Press the TV button on the
Sky Remote
2) Hold down the select and
Green buttons for 2-3 seconds until the LED blinks twice
3) Enter the program number for
the TV channel which Sky is normally viewed on
4) Press the select button to
store, the LED should blink twice.
Now you only need press the Sky
button to view Sky on your chosen TV channel.
A full list of the Codes can be
found at Sky Remote Control Codes or on
the interactive services on your Sky receiver.
Back
